Take the 2-minute tour ×
Unix & Linux Stack Exchange is a question and answer site for users of Linux, FreeBSD and other Un*x-like operating systems.. It's 100% free, no registration required.

sudo fdisk -l gives :

255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xdb20e840

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048   104859647    52428800    7  HPFS/NTFS/exFAT
/dev/sda2       104859648   310630399   102885376    7  HPFS/NTFS/exFAT
/dev/sda3       310632840   372065399    30716280   83  Linux
/dev/sda4       372072446   838281215   233104385    5  Extended
/dev/sda5       372072448   392552447    10240000   83  Linux
/dev/sda6       392554496   453994495    30720000   83  Linux
/dev/sda7       453996544   515436543    30720000   83  Linux
/dev/sda8       515438592   515456169        8789   82  Linux swap / Solaris
/dev/sda9       515457024   552321023    18432000   83  Linux
/dev/sda10      552323072   585091071    16384000   83  Linux
/dev/sda11      585093120   617861119    16384000   83  Linux
/dev/sda12      617876028   822656519   102390246    7  HPFS/NTFS/exFAT
/dev/sda13      822657024   838281215     7812096   82  Linux swap / Solaris

While df -h gives :

Filesystem      Size  Used Avail Use% Mounted on
/cow            1.9G   30M  1.9G   2% /
udev            1.9G  4.0K  1.9G   1% /dev
tmpfs           385M  1.1M  384M   1% /run
/dev/sr0        913M  913M     0 100% /cdrom
/dev/loop0      874M  874M     0 100% /rofs
none            4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs           1.9G  8.0K  1.9G   1% /tmp
none            5.0M     0  5.0M   0% /run/lock
none            1.9G   80K  1.9G   1% /run/shm
none            100M   24K  100M   1% /run/user
/dev/sda9        18G  1.2G   16G   8% /media/xubuntu/b90d1c45-7805-421b-9ba7-88ab7ed04fd3
/dev/sda7        29G  4.2G   24G  16% /media/xubuntu/964f9a2f-3641-4754-8319-1decea626931
/dev/sda6        29G   20G  7.8G  72% /media/xubuntu/4f6e6be0-a703-4cb6-a425-9ae73f31eb82
/dev/sda5       9.5G   22M  9.0G   1% /media/xubuntu/3c662996-cf77-41a3-9b5d-d7520f8d534a
/dev/sda3        29G  3.4G   24G  13% /media/xubuntu/57f03636-d50f-43fe-97c0-192b761d7054
/dev/sda12       98G   18G   81G  19% /media/xubuntu/5943EBDD309DF483
/dev/sda11       16G  935M   14G   7% /media/xubuntu/a2176105-4afc-4f19-b182-c027925e249e
/dev/sda10       16G   40M   15G   1% /media/xubuntu/4397bd85-5172-4dc4-a4ce-e9690d3ac7f9
/dev/sda1        50G   32G   19G  64% /media/xubuntu/OSDisk

How can I combine these two results using awk or something else to have in the same command that result in the following output.

**Device  -  System_Type  -  Size   -  Use%    -    Mount_Point**
share|improve this question

4 Answers 4

why can't you try df -hT?


-bash-3.2$ df -hT
Filesystem    Type    Size  Used Avail Use% Mounted on
/dev/sda2     ext3     48G   17G   29G  37% /
/dev/sda5     ext3    238G   66G  160G  30% /home
/dev/sda1     ext3     99M   17M   77M  18% /boot
tmpfs        tmpfs    2.0G     0  2.0G   0% /dev/shm

The type specifies the system type and the only exception is this will show only the mounted file systems as opposed to fdisk -l which shows all the available partitions irrespective of whether they are mounted or not.

share|improve this answer
I prefer to get only physical filesystems in the output. How can do so? –  Nadina May 28 at 20:18
Do you mean to get the system type as Windows/Linux in the output? –  Ramesh May 28 at 20:24
yes not to get FS such udev, tmpfs and so on.. –  Nadina May 28 at 21:00

From man mount:

For more robust and definable output use findmnt...

findmnt --help
-D - imitate the behavior of df
Available Columns:
      SOURCE  source device
      TARGET  mountpoint
      FSTYPE  filesystem type
     OPTIONS  all mount options
 VFS-OPTIONS  VFS specific mount options
  FS-OPTIONS  FS specific mount options
       LABEL  filesystem label
        UUID  filesystem UUID
   PARTLABEL  partition label
    PARTUUID  partition UUID
     MAJ:MIN  major:minor device number
      ACTION  action detected by --poll
  OLD-TARGET  old mountpoint saved by --poll
 OLD-OPTIONS  old mount options saved by --poll
        SIZE  filesystem size
       AVAIL  filesystem size available
        USED  filesystem size used
        USE%  filesystem use percentage
      FSROOT  filesystem root
         TID  task ID
          ID  mount ID
  OPT-FIELDS  optional mount fields
 PROPAGATION  VFS propagation flags
        FREQ  dump(8) period in days [fstab only]
      PASSNO  pass number on parallel fsck(8) [fstab only]


findmnt -D

SOURCE                  FSTYPE           SIZE   USED AVAIL USE% TARGET
devtmpfs                devtmpfs        11.8G      0 11.8G   0% /dev
tmpfs                   tmpfs           11.8G  95.1M 11.7G   1% /dev/shm
tmpfs                   tmpfs           11.8G   928K 11.8G   0% /run
tmpfs                   tmpfs           11.8G      0 11.8G   0% /sys/fs/cgroup
/dev/sda2[/manjaro]     btrfs             12G   7.8G  3.8G  65% /
tmpfs                   tmpfs           11.8G 758.2M   11G   6% /tmp
/dev/sda1               vfat               3G   588M  2.4G  19% /esp
/dev/sda1[/EFI/manjaro] vfat               3G   588M  2.4G  19% /boot
tmpfs                   tmpfs            2.4G     8K  2.4G   0% /run/user/1000
gvfsd-fuse              fuse.gvfsd-fuse     0      0     0    - /run/user/1000/gvfs
share|improve this answer

Here's a modified version of Ramesh's answer which gives you the columns you need of only the important filesystems (not udev, tmpfs).

disks=$(sudo fdisk -l | grep -Po "/dev/sd.\d+")
for i in $disks; do df -Th $i | tail -n 1; done
share|improve this answer
He wants the Filesystem Type in there as well. That's part of the problem. –  Jeight Jun 4 at 21:42

This might be to simple but you could always just use &&:

sudo fdisk -l && df -h

But cfdisk may do what you're wanting:

cfdisk -P s

Partition Table for /dev/sda

           First       Last
# Type       Sector      Sector   Offset    Length   Filesystem Type (ID) Flag
-- ------- ----------- ----------- ------ ----------- -------------------- ----
 Pri/Log           0        2047*     0#       2048*Free Space           None
 1 Primary        2048*    1026047*     0     1024000*Linux (83)           Boot
 2 Primary     1026048*    3074047*     0     2048000*Linux swap / So (82) None
 3 Primary     3074048*   41943039*     0    38868992*Linux LVM (8E)       None
share|improve this answer
Whomever down voted me, learn to take a joke...geeze. My second (serious) answer has both the file length and Filesystem Types which was kinda (not exactly) what he was asking for. –  Jeight Jun 4 at 21:44

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.