Take the 2-minute tour ×
Unix & Linux Stack Exchange is a question and answer site for users of Linux, FreeBSD and other Un*x-like operating systems.. It's 100% free, no registration required.

When I SSH into Windows 7(Cygwin) from a remote, the session freezes after few seconds or up to two minutes. This can happen while I'm typing and it can happen when idle. This is still happening after cygwin has been re-installed.

I'm SSH'ing to a Windows 7 system from a Fedora 20. Fedora has also been re-intalled. And it is still happening after both Cygwin and Fedora have been re-installed.

I need to do= "enter" "~" "." to get my terminal back.

What is the cause of this?

I'm not at the remote location now, but I can connect with ssh -vvv when I get there to give some debugging.

EDIT: I was not able to reproduce the problem, the problem seems to have gone away, changing the config files did not fix the problem before, so I can't understand why the problem is gone? I just did two sessions from different ip's and it didn't freeze.

Here are the debug from one of the sessions:

[UserName@HostName ~]$ ssh -X -vvv UserName@HostName -p Port
OpenSSH_6.4, OpenSSL 1.0.1e-fips 11 Feb 2013
debug1: Reading configuration data /home/UserName/.ssh/config
debug1: /home/UserName/.ssh/config line 20: Applying options for *
debug1: /home/UserName/.ssh/config line 54: Applying options for *
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 20: Applying options for *
debug1: /etc/ssh/ssh_config line 54: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to HostName [HostName] port Port.
debug2: fd 3 setting O_NONBLOCK
debug1: fd 3 clearing O_NONBLOCK
debug1: Connection established.
debug3: timeout: 499954 ms remain after connect
debug1: identity file /home/UserName/.ssh/id_rsa type -1
debug1: identity file /home/UserName/.ssh/id_rsa-cert type -1
debug1: identity file /home/UserName/.ssh/id_dsa type -1
debug1: identity file /home/UserName/.ssh/id_dsa-cert type -1
debug1: identity file /home/UserName/.ssh/id_ecdsa type -1
debug1: identity file /home/UserName/.ssh/id_ecdsa-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.4
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6
debug1: match: OpenSSH_6.6 pat OpenSSH*
debug2: fd 3 setting O_NONBLOCK
debug3: put_host_port: [HostName]:Port
debug3: load_hostkeys: loading entries for host "[HostName]:34500" from file "/home/UserName/.ssh/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /home/UserName/.ssh/known_hosts:10
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-rsa-cert-v01@openssh.com,ssh-dss-cert-v01@openssh.com,ssh-rsa-cert-v00@openssh.com,ssh-dss-cert-v00@openssh.com,ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: first_kex_follows 0 
debug2: kex_parse_kexinit: reserved 0 
debug2: kex_parse_kexinit: curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256,ssh-ed25519
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: first_kex_follows 0 
debug2: kex_parse_kexinit: reserved 0 
debug2: mac_setup: found hmac-md5-etm@openssh.com
debug1: kex: server->client aes128-ctr hmac-md5-etm@openssh.com none
debug2: mac_setup: found hmac-md5-etm@openssh.com
debug1: kex: client->server aes128-ctr hmac-md5-etm@openssh.com none
debug1: sending SSH2_MSG_KEX_ECDH_INIT
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ECDSA b5:05:1a:33:1b:44:21:ae:00:37:0f:2b:24:ae:41:26
debug3: put_host_port: [HostName]:Port
debug3: put_host_port: [HostName]:Port
debug3: load_hostkeys: loading entries for host "[HostName]:Port" from file "/home/UserName/.ssh/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /home/UserName/.ssh/known_hosts:10
debug3: load_hostkeys: loaded 1 keys
debug3: load_hostkeys: loading entries for host "[HostName]:Port" from file "/home/UserName/.ssh/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /home/UserName/.ssh/known_hosts:10
debug3: load_hostkeys: loaded 1 keys
debug1: Host '[HostName]:Port' is known and matches the ECDSA host key.
debug1: Found key in /home/UserName/.ssh/known_hosts:10
debug1: ssh_ecdsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/UserName/.ssh/id_rsa ((nil)),
debug2: key: /home/UserName/.ssh/id_dsa ((nil)),
debug2: key: /home/UserName/.ssh/id_ecdsa ((nil)),
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug3: start over, passed a different list publickey,password,keyboard-interactive
debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/UserName/.ssh/id_rsa
debug3: no such identity: /home/UserName/.ssh/id_rsa: No such file or directory
debug1: Trying private key: /home/UserName/.ssh/id_dsa
debug3: no such identity: /home/UserName/.ssh/id_dsa: No such file or directory
debug1: Trying private key: /home/UserName/.ssh/id_ecdsa
debug3: no such identity: /home/UserName/.ssh/id_ecdsa: No such file or directory
debug2: we did not send a packet, disable method
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug3: userauth_kbdint: disable: no info_req_seen
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: 
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
UserName@HostName's password: 
debug3: packet_send2: adding 48 (len 66 padlen 14 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: Authentications that can continue: publickey,password,keyboard-interactive
Permission denied, please try again.
UserName@HostName's password: 
debug3: packet_send2: adding 48 (len 68 padlen 12 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
Authenticated to HostName ([HostName]:Port).
debug1: Requesting tun unit 2147483647 in mode 1
debug1: sys_tun_open: failed to configure tunnel (mode 1): Operation not permitted
Tunnel device open failed.
Could not request tunnel forwarding.
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Requesting no-more-sessions@openssh.com
debug1: Entering interactive session.
debug2: callback start
debug2: x11_get_proto: /usr/bin/xauth  list :0 2>/dev/null
debug1: Requesting X11 forwarding with authentication spoofing.
debug2: channel 0: request x11-req confirm 1
debug2: fd 3 setting TCP_NODELAY
debug3: packet_set_tos: set IP_TOS 0x10
debug2: client_session2_setup: id 0
debug2: channel 0: request pty-req confirm 1
debug1: Sending environment.
debug3: Ignored env XDG_VTNR
debug3: Ignored env DREAL_TECHNO_NAME
debug3: Ignored env MANPATH
debug3: Ignored env VH_PATSFX
debug3: Ignored env SSH_AGENT_PID
debug3: Ignored env KDE_MULTIHEAD
debug3: Ignored env TPD_GLOBAL
debug3: Ignored env XDG_SESSION_ID
debug3: Ignored env DM_CONTROL
debug3: Ignored env HOSTNAME
debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP
debug3: Ignored env GPG_AGENT_INFO
debug3: Ignored env MBK_IN_PH
debug3: Ignored env TERM
debug3: Ignored env SHELL
debug3: Ignored env XDG_MENU_PREFIX
debug3: Ignored env XSCH_PARAM_NAME
debug3: Ignored env HISTSIZE
debug3: Ignored env XDM_MANAGED
debug3: Ignored env GTK2_RC_FILES
debug3: Ignored env KONSOLE_DBUS_SERVICE
debug3: Ignored env KONSOLE_PROFILE_NAME
debug3: Ignored env VH_MAXERR
debug3: Ignored env GTK_RC_FILES
debug3: Ignored env GS_LIB
debug3: Ignored env WINDOWID
debug3: Ignored env QTDIR
debug3: Ignored env RDS_OUT
debug3: Ignored env GNOME_KEYRING_CONTROL
debug3: Ignored env QTINC
debug3: Ignored env SHELL_SESSION_ID
debug3: Ignored env XFSM_PARAM_NAME
debug3: Ignored env ALLIANCE_TOP
debug3: Ignored env GRAAL_TECHNO_NAME
debug3: Ignored env KDE_FULL_SESSION
debug3: Ignored env TPD_LOCAL
debug3: Ignored env IMSETTINGS_MODULE
debug3: Ignored env QT_GRAPHICSSYSTEM_CHECKED
debug3: Ignored env USER
debug3: Ignored env LS_COLORS
debug3: Ignored env LD_LIBRARY_PATH
debug3: Ignored env SSH_AUTH_SOCK
debug3: Ignored env SESSION_MANAGER
debug3: Ignored env DESKTOP_SESSION
debug3: Ignored env PATH
debug3: Ignored env MAIL
debug3: Ignored env MBK_SCALE_X
debug3: Ignored env QT_IM_MODULE
debug3: Ignored env MBK_CATAL_NAME
debug3: Ignored env PWD
debug1: Sending env XMODIFIERS = @im=none
debug2: channel 0: request env confirm 0
debug3: Ignored env KONSOLE_DBUS_WINDOW
debug3: Ignored env MBK_OUT_PH
debug1: Sending env LANG = en_US.UTF-8
debug2: channel 0: request env confirm 0
debug3: Ignored env KDE_IS_PRELINKED
debug3: Ignored env GNOME_KEYRING_PID
debug3: Ignored env KDE_SESSION_UID
debug3: Ignored env GENVIEW_TECHNO_NAME
debug3: Ignored env RDS_IN
debug3: Ignored env MBK_SPI_MODEL
debug3: Ignored env KDEDIRS
debug3: Ignored env MBK_OUT_LO
debug3: Ignored env KONSOLE_DBUS_SESSION
debug3: Ignored env MBK_VSS
debug3: Ignored env HISTCONTROL
debug3: Ignored env VH_BEHSFX
debug3: Ignored env SSH_ASKPASS
debug3: Ignored env COLORFGBG
debug3: Ignored env SHLVL
debug3: Ignored env XDG_SEAT
debug3: Ignored env HOME
debug3: Ignored env KDE_SESSION_VERSION
debug1: Sending env LANGUAGE = 
debug2: channel 0: request env confirm 0
debug3: Ignored env MBK_C4_LIB
debug3: Ignored env MBK_VDD
debug3: Ignored env MBK_TARGET_LIB
debug3: Ignored env XCURSOR_THEME
debug3: Ignored env RDS_TECHNO_NAME
debug3: Ignored env LOGNAME
debug3: Ignored env VH_DLYSFX
debug3: Ignored env QTLIB
debug3: Ignored env CVS_RSH
debug3: Ignored env DBUS_SESSION_BUS_ADDRESS
debug3: Ignored env XDG_DATA_DIRS
debug3: Ignored env MBK_IN_LO
debug3: Ignored env LESSOPEN
debug3: Ignored env MBK_WORK_LIB
debug3: Ignored env XPAT_PARAM_NAME
debug3: Ignored env WINDOWPATH
debug3: Ignored env PROFILEHOME
debug3: Ignored env XDG_RUNTIME_DIR
debug3: Ignored env DISPLAY
debug3: Ignored env QT_PLUGIN_PATH
debug3: Ignored env XDG_CURRENT_DESKTOP
debug3: Ignored env GTK_IM_MODULE
debug3: Ignored env ELP_TECHNO_NAME
debug3: Ignored env MBK_CATA_LIB
debug3: Ignored env CCACHE_HASHDIR
debug3: Ignored env XAUTHORITY
debug3: Ignored env _
debug2: channel 0: request shell confirm 1
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel_input_status_confirm: type 99 id 0
debug2: X11 forwarding request accepted on channel 0
debug2: channel_input_status_confirm: type 99 id 0
debug2: PTY allocation request accepted on channel 0
debug2: channel 0: rcvd adjust 2097152
debug2: channel_input_status_confirm: type 99 id 0
debug2: shell request accepted on channel 0
Last login: Wed Apr 16 23:58:48 2014 from HostName
      ____________________,             ______________________________________
   .QQQQQQQQQQQQQQQQQQQQQQQQL_         |                                      |
 .gQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQ__   |                                      |
 gQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQ==   |                    _.---.)           |
 QQQQQQQQQQQQQQQQQQQQQQQQQQQF=         |          (^--^)_.-"      `;          |
 QQQQQQQQQ================!            |          ) ee (           |          |
 QQQQQQQQ                              |         (_.__._)         /           |
 QQQQQQQQ                              |           `--',        ,'            |
 QQQQQQQQ     ~"jjj__,                 |            jgs )_|--')_|             |
 QQQQQQQQ       "jjjjjjjjjj___         |                ""'   ""'             |
 QQQQQQQQ        ~jjjjjjjjjjjjjjjjj__  |                                      |
 QQQQQQQQ        _jjjjjjjjjjjjjj/~~~~  |      The Hippo says: Welcome to      |
 QQQQQQQQ      .{jjjjjjj/~~~~~         |                             _        |
 QQQQQQQQ     .{/~~~~`                 |  ____  _   _   ____  _ _ _ (_) ____  |
 QQQQQQQQ                              | / ___)| | | | / _  || | | || ||  _ \ |
 QQQQQQQQ                              |( (___ | |_| |( (_| || | | || || | | ||
 QQQQQQQQQL_______________,            | \____) \__  | \___ | \___/ |_||_| |_||
 QQQQQQQQQQQQQQQQQQQQQQQQQQQL___       |        (___/  (____|                 |
 4QQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQ___  |                                      |
 (=QQQQQQQQQQQQQQQQQQQQQQQQQQQQQ====   |       -.-. -.-- --. .-- .. -.        |
   (QQQQQQQQQQQQQQQQQQQQQQQQF=         |______________________________________|


UserName@HostName ~
$ ls

UserName@HostName ~
$ nano thisIsATest

UserName@HostName ~
$ gedit &
[1] 2556

UserName@HostName ~
$ debug1: client_input_channel_open: ctype x11 rchan 3 win 65536 max 16384
debug1: client_request_x11: request from ::1 62165
debug2: fd 7 setting O_NONBLOCK
debug3: fd 7 is O_NONBLOCK
debug1: channel 1: new [x11]
debug1: confirm x11
debug2: channel 1: rcvd eof
debug2: channel 1: output open -> drain
debug2: channel 1: obuf empty
debug2: channel 1: close_write
debug2: channel 1: output drain -> closed
debug1: channel 1: FORCE input drain
debug2: channel 1: ibuf empty
debug2: channel 1: send eof
debug2: channel 1: input drain -> closed
debug2: channel 1: send close
debug3: channel 1: will not send data after close
debug3: channel 1: will not send data after close

** (gedit:2556): WARNING **: Couldn't connect to accessibility bus: Operating system does not support abstract socket namespace

debug3: channel 1: will not send data after close
debug2: channel 1: rcvd close
debug3: channel 1: will not send data after close
debug2: channel 1: is dead
debug2: channel 1: garbage collecting
debug1: channel 1: free: x11, nchannels 2
debug3: channel 1: status: The following connections are open:
  #0 client-session (t4 r0 i0/0 o0/0 fd 4/5 cc -1)
  #1 x11 (t4 r3 i3/0 o3/0 fd 7/7 cc -1)

debug1: client_input_channel_open: ctype x11 rchan 3 win 65536 max 16384
debug1: client_request_x11: request from ::1 62167
debug2: fd 7 setting O_NONBLOCK
debug3: fd 7 is O_NONBLOCK
debug1: channel 1: new [x11]
debug1: confirm x11
debug1: client_input_channel_open: ctype x11 rchan 4 win 65536 max 16384
debug1: client_request_x11: request from ::1 62172
debug2: fd 8 setting O_NONBLOCK
debug3: fd 8 is O_NONBLOCK
debug1: channel 2: new [x11]
debug1: confirm x11
debug1: client_input_channel_open: ctype x11 rchan 5 win 65536 max 16384
debug1: client_request_x11: request from ::1 62173
debug2: fd 9 setting O_NONBLOCK
debug3: fd 9 is O_NONBLOCK
debug1: channel 3: new [x11]
debug1: confirm x11
debug2: channel 3: rcvd eof
debug2: channel 3: output open -> drain
debug2: channel 3: obuf empty
debug2: channel 3: close_write
debug2: channel 3: output drain -> closed
debug1: channel 3: FORCE input drain
debug2: channel 3: ibuf empty
debug2: channel 3: send eof
debug2: channel 3: input drain -> closed
debug2: channel 3: send close
debug3: channel 3: will not send data after close
debug2: channel 3: rcvd close
debug3: channel 3: will not send data after close
debug2: channel 3: is dead
debug2: channel 3: garbage collecting
debug1: channel 3: free: x11, nchannels 4
debug3: channel 3: status: The following connections are open:
  #0 client-session (t4 r0 i0/0 o0/0 fd 4/5 cc -1)
  #1 x11 (t4 r3 i0/0 o0/0 fd 7/7 cc -1)
  #2 x11 (t4 r4 i0/0 o0/0 fd 8/8 cc -1)
  #3 x11 (t4 r5 i3/0 o3/0 fd 9/9 cc -1)

^C
[1]+  Done                    gedit

UserName@HostName ~
$ jobs

UserName@HostName ~
$ kill %1 %2 %3 %4
-bash: kill: %1: no such job
-bash: kill: %2: no such job
-bash: kill: %3: no such job
-bash: kill: %4: no such job

UserName@HostName ~
$ firefox
-bash: firefox: command not found

UserName@HostName ~
$ ls
thisIsATest

UserName@HostName ~
$ exit
logout
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug1: client_input_channel_req: channel 0 rtype eow@openssh.com reply 0
debug2: channel 0: rcvd eow
debug2: channel 0: close_read
debug2: channel 0: input open -> closed
debug2: channel 0: rcvd eof
debug2: channel 0: output open -> drain
debug2: channel 0: obuf empty
debug2: channel 0: close_write
debug2: channel 0: output drain -> closed
debug2: channel 0: rcvd close
debug3: channel 0: will not send data after close
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 3
debug3: channel 0: status: The following connections are open:
  #0 client-session (t4 r0 i3/0 o3/0 fd -1/-1 cc -1)
  #1 x11 (t4 r3 i0/0 o0/0 fd 7/7 cc -1)
  #2 x11 (t4 r4 i0/0 o0/0 fd 8/8 cc -1)
share|improve this question

closed as unclear what you're asking by strugee, slm, Anthon, jasonwryan, Karlson Apr 15 at 14:45

Please clarify your specific problem or add additional details to highlight exactly what you need. As it's currently written, it’s hard to tell exactly what you're asking. See the How to Ask page for help clarifying this question.If this question can be reworded to fit the rules in the help center, please edit the question.

add comment

Browse other questions tagged or ask your own question.