I have been following the Install Wiki and I have arrived at the part where I need to install X Server. My issue is that I cant install X because my DNS doesnt work. I can ping 22.214.171.124 just fine, google.com does not respond.
Running Arch as a VM through Hyper-V
# nano /etc/resolv.conf nameserver 126.96.36.199 nameserver 188.8.131.52 # systemctl stop dhcpcd.service #ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noquene state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN mode DEFAULT mode DEFAULT group default qlen 1000 link/ether 00:15:5d:00:0f:03 brd ff:ff:ff:ff:ff:ff # ip link set eth0 up # ip addr add 10.100.0.25/24 dev eth0 # ip route add default via 10.100.0.25
Where should I start in troubleshooting this? I dont mind working out the problem I just dont know what to do.