Take the 2-minute tour ×
Unix & Linux Stack Exchange is a question and answer site for users of Linux, FreeBSD and other Un*x-like operating systems.. It's 100% free, no registration required.

My still camera is not includev in udev list.

lsusb stands:

Bus 007 Device 016: ID 040a:058b Kodak Co. Digital Camera

So I add to /usr/lib/udev/rules.d/40-libgphoto2.rules

ATTRS{idVendor}=="040a", ATTRS{idProduct}=="058b", ENV{ID_GPHOTO2}="1", ENV{GPHOTO2_DRIVER}="proprietary"

according to the entry for similar unit from the same vendor but different idProduct "058a"

But my camera is not available from any photo app including gwenview or even from any filemanager. Simply can not be mounted as a storage.

Any idea how to correct my entry in udev?

share|improve this question

2 Answers 2

up vote 1 down vote accepted

I worked at Kodak for 15+ years and have used the products extensively. I would recommend getting a card reader and just taking the cards out of the camera and plugging them into the reader instead. You will save yourself a lot of annoyance and aggravations.

USB card readers can usually be picked up for 10-20 US dollars. Ironically I use several that I picked up at the Kodak employee store, they're worth their weight in gold. The readers I purchased could read a variety of card formats and were designed to be portable so they can easily be thrown in the bag with the cameras as well.

I do this for all my cameras, all brands and it's just a lot easier than monkeying around with attaching the cameras to the computer.

USB readers

This is the reader that I picked up, it's for sale on Amazon for $7 US dollars.

                              ss of reader

There are tons of others that are similar to this one. These readers are often called 40-in-1's or 50-in-1's because they can read a variety of card form-factors.

share|improve this answer
    
Yep. Good advise. But I have to explain it my wife. Too difficult challenge. So as I mentioned before could the camera to be ordinary "USB mass storage device" as under Winows? –  mackowiakp Dec 27 '13 at 18:38
1  
Most of the later Kodak cameras could go in either mode. You had to change it in the firmware/setup of the camera. Which model are you using? –  slm Dec 27 '13 at 22:23
    
Of course I have such SD-> USB reader even that one buid in in to the laptop directly. As I mentioned later, the camera setup does not contain "USB mass storage device" or similar option. My camera is Kodak EasyShare Z1012 IS –  mackowiakp Dec 28 '13 at 8:53
    
@user180586 - I know you mentioned it, I found it odd, given that most of the cameras I have/had from work had the mass storage feature. Odd that this one doesn't. I wanted to search on the model # to see what others had been doing under linux, if any. –  slm Dec 28 '13 at 14:32
    
@user180586 - incidentally I found zero info on this camera + Linux. –  slm Dec 28 '13 at 14:49

I had the same issue. Kodak cameras by default present themselves as PTP cameras, not as USB mass storage devices to the USB host. This gives you two possibilities:

  • use the camera's menu to switch it to something like "USB mass storage device" instead of something like "PTP camera"
  • use the software gphoto2 to obtain pictures from your PTP camera.

If you insist your camera is a USB mass storage device please call

hwinfo --block --short

This will list all block devices (incl. USB storage devices) visible to your kernel. I documented my experiences at http://www.linuxintro.org/wiki/Digital_camera

share|improve this answer
    
Hmm. The problem is that setup does not contains "USB mass storage device". But under Windows, I can see my Kodak camera as exactly "USB mass storage device". So is it possible to do the same in Linux? –  mackowiakp Dec 27 '13 at 18:36
    
yes. Use a normal kernel, nothing fancy, no modifications to udev. Attach your camera, type hwinfo --block --short. Does a line show up that could be your camera? –  Thorsten Staerk Dec 28 '13 at 5:12
    
hwinfo --block --short does not show my camera as mass storage device. In menu there is no option "USB mass storage dev". My camera is Kodak EasyShare Z1012 IS. –  mackowiakp Dec 28 '13 at 8:49
    
I had the EasyShare as well. Try gphoto2 to get all files: gphoto2 --get-all-files –  Thorsten Staerk Dec 28 '13 at 10:05
    
Compiling gphotofs from src.rpm (on my Linux platform) resolved my problem! Now I can see SD card over PTP in any file manager because SD card inside camera is mounted as filesystem via udev –  mackowiakp Dec 30 '13 at 8:36

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.