Take the 2-minute tour ×
Unix & Linux Stack Exchange is a question and answer site for users of Linux, FreeBSD and other Un*x-like operating systems.. It's 100% free, no registration required.

i have a very peculiar issue that is running in my system.

Using debian linux :

My system boots up very normally with a primary and secondary hard disk. suddenly my secondary hard disk fails with some I/O Error DRDY UNC errors which tends make my primary SDA to read only filesystem.

  1. how to avoid primary to be changed as read only
  2. What are all the steps i need to do for removing the SDB reference from the system
  3. Is it possible to detect SDB removal from the system

    • i was not able notice anything on SDA becoming readonly file ssytem

Kernel Log::

15:52:13::kernel::[  203.251575] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
15:52:13::kernel::[  203.251641] ata1.01: BMDMA stat 0x65
15:52:13::kernel::[  203.251699] ata1.01: failed command: READ DMA EXT
15:52:13::kernel::[  203.251768] ata1.01: cmd 25/00:08:f8:17:00/00:00:25:00:00/f0 tag 0 dma 4096 in
15:52:13::kernel::[  203.251771]          res 51/40:00:f8:17:00/40:00:25:00:00/10 Emask 0x9 (media error)
15:52:13::kernel::[  203.251932] ata1.01: status: { DRDY ERR }
15:52:13::kernel::[  203.251990] ata1.01: error: { UNC }
15:52:13::kernel::[  203.373641] ata1.00: configured for UDMA/133
15:52:13::kernel::[  203.405721] ata1.01: configured for UDMA/133
15:52:13::kernel::[  203.406808] ata1: EH complete
15:52:13::kernel::[  205.661201] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
15:52:13::kernel::[  205.661267] ata1.01: BMDMA stat 0x65
15:52:13::kernel::[  205.661324] ata1.01: failed command: READ DMA EXT
15:52:13::kernel::[  205.661393] ata1.01: cmd 25/00:08:f8:17:00/00:00:25:00:00/f0 tag 0 dma 4096 in
15:52:13::kernel::[  205.661396]          res 51/40:00:f8:17:00/40:00:25:00:00/10 Emask 0x9 (media error)
15:52:13::kernel::[  205.661556] ata1.01: status: { DRDY ERR }
15:52:13::kernel::[  205.661614] ata1.01: error: { UNC }
15:52:13::kernel::[  205.769671] ata1.00: configured for UDMA/133
15:52:13::kernel::[  205.817705] ata1.01: configured for UDMA/133
15:52:13::kernel::[  205.817776] sd 0:0:1:0: [sdb] Unhandled sense code
15:52:13::kernel::[  205.817836] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
15:52:13::kernel::[  205.817930] sd 0:0:1:0: [sdb] Sense Key : Medium Error [current] [descriptor]
15:52:13::kernel::[  205.818105] Descriptor sense data with sense descriptors (in hex):
15:52:13::kernel::[  205.818193]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
15:52:13::kernel::[  205.818722]         25 00 17 f8 
15:52:13::kernel::[  205.818914] sd 0:0:1:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
15:52:13::kernel::[  205.819056] sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 25 00 17 f8 00 00 08 00
15:52:13::kernel::[  205.819477] end_request: I/O error, dev sdb, sector 620763128
15:52:13::kernel::[  205.819542] Buffer I/O error on device sdb5, logical block 70778879
15:52:13::kernel::[  205.819625] ata1: EH complete
15:52:13::kernel::[  208.257956] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
15:52:13::kernel::[  208.258023] ata1.01: BMDMA stat 0x65
15:52:13::kernel::[  208.258081] ata1.01: failed command: READ DMA EXT
15:52:13::kernel::[  208.258149] ata1.01: cmd 25/00:08:f8:17:00/00:00:25:00:00/f0 tag 0 dma 4096 in
15:52:13::kernel::[  208.258153]          res 51/40:00:f8:17:00/40:00:25:00:00/10 Emask 0x9 (media error)
15:52:13::kernel::[  208.258314] ata1.01: status: { DRDY ERR }
15:52:13::kernel::[  208.258372] ata1.01: error: { UNC }
15:52:13::kernel::[  208.377642] ata1.00: configured for UDMA/133
15:52:13::kernel::[  208.409704] ata1.01: configured for UDMA/133
15:52:13::kernel::[  208.409771] ata1: EH complete
15:52:13::kernel::[  210.667618] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
15:52:13::kernel::[  210.667684] ata1.01: BMDMA stat 0x65
15:52:13::kernel::[  210.667742] ata1.01: failed command: READ DMA EXT
15:52:13::kernel::[  210.667810] ata1.01: cmd 25/00:08:f8:17:00/00:00:25:00:00/f0 tag 0 dma 4096 in
15:52:13::kernel::[  210.667814]          res 51/40:00:f8:17:00/40:00:25:00:00/10 Emask 0x9 (media error)
15:52:13::kernel::[  210.667974] ata1.01: status: { DRDY ERR }
15:52:13::kernel::[  210.668048] ata1.01: error: { UNC }
15:52:13::kernel::[  210.789641] ata1.00: configured for UDMA/133
15:52:13::kernel::[  210.821716] ata1.01: configured for UDMA/133
15:52:13::kernel::[  210.821783] ata1: EH complete
15:52:13::kernel::[  213.088237] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
15:52:13::kernel::[  213.088302] ata1.01: BMDMA stat 0x65
15:52:13::kernel::[  213.088359] ata1.01: failed command: READ DMA EXT
15:52:13::kernel::[  213.088427] ata1.01: cmd 25/00:08:f8:17:00/00:00:25:00:00/f0 tag 0 dma 4096 in
15:52:13::kernel::[  213.088430]          res 51/40:00:f8:17:00/40:00:25:00:00/10 Emask 0x9 (media error)
15:52:13::kernel::[  213.088590] ata1.01: status: { DRDY ERR }
15:52:13::kernel::[  213.088648] ata1.01: error: { UNC }
15:52:13::kernel::[  213.209641] ata1.00: configured for UDMA/133
15:52:13::kernel::[  213.241715] ata1.01: configured for UDMA/133
15:52:13::kernel::[  213.241782] ata1: EH complete
15:52:13::kernel::[  215.508902] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
15:52:13::kernel::[  215.508969] ata1.01: BMDMA stat 0x65
15:52:13::kernel::[  215.509028] ata1.01: failed command: READ DMA EXT
15:52:13::kernel::[  215.509098] ata1.01: cmd 25/00:08:f8:17:00/00:00:25:00:00/f0 tag 0 dma 4096 in
15:52:13::kernel::[  215.509101]          res 51/40:00:f8:17:00/40:00:25:00:00/10 Emask 0x9 (media error)
15:52:13::kernel::[  215.509263] ata1.01: status: { DRDY ERR }
15:52:13::kernel::[  215.509321] ata1.01: error: { UNC }
15:52:13::kernel::[  215.629629] ata1.00: configured for UDMA/133
15:52:13::kernel::[  215.661719] ata1.01: configured for UDMA/133
15:52:13::kernel::[  215.661787] ata1: EH complete
15:52:13::kernel::[  217.918569] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
15:52:13::kernel::[  217.918636] ata1.01: BMDMA stat 0x65
15:52:13::kernel::[  217.918694] ata1.01: failed command: READ DMA EXT
15:52:13::kernel::[  217.918762] ata1.01: cmd 25/00:08:f8:17:00/00:00:25:00:00/f0 tag 0 dma 4096 in
15:52:13::kernel::[  217.918765]          res 51/40:00:f8:17:00/40:00:25:00:00/10 Emask 0x9 (media error)
15:52:13::kernel::[  217.918927] ata1.01: status: { DRDY ERR }
15:52:13::kernel::[  217.918986] ata1.01: error: { UNC }
15:52:13::kernel::[  218.041627] ata1.00: configured for UDMA/133
15:52:13::kernel::[  218.073729] ata1.01: configured for UDMA/133
15:52:13::kernel::[  218.073795] ata1: EH complete
15:52:13::kernel::[  220.328276] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
15:52:13::kernel::[  220.328342] ata1.01: BMDMA stat 0x65
15:52:13::kernel::[  220.328400] ata1.01: failed command: READ DMA EXT
15:52:13::kernel::[  220.328469] ata1.01: cmd 25/00:08:f8:17:00/00:00:25:00:00/f0 tag 0 dma 4096 in
15:52:13::kernel::[  220.328472]          res 51/40:00:f8:17:00/40:00:25:00:00/10 Emask 0x9 (media error)
15:52:13::kernel::[  220.328633] ata1.01: status: { DRDY ERR }
15:52:13::kernel::[  220.328690] ata1.01: error: { UNC }
15:52:13::kernel::[  220.449628] ata1.00: configured for UDMA/133
15:52:13::kernel::[  220.481707] ata1.01: configured for UDMA/133
15:52:13::kernel::[  220.481776] sd 0:0:1:0: [sdb] Unhandled sense code
15:52:13::kernel::[  220.481835] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
15:52:13::kernel::[  220.481928] sd 0:0:1:0: [sdb] Sense Key : Medium Error [current] [descriptor]
15:52:13::kernel::[  220.482104] Descriptor sense data with sense descriptors (in hex):
15:52:13::kernel::[  220.482193]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
15:52:13::kernel::[  220.482720]         25 00 17 f8 
15:52:13::kernel::[  220.482911] sd 0:0:1:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
15:52:13::kernel::[  220.483053] sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 25 00 17 f8 00 00 08 00
15:52:13::kernel::[  220.483473] end_request: I/O error, dev sdb, sector 620763128
15:52:13::kernel::[  220.483538] Buffer I/O error on device sdb5, logical block 70778879
15:52:13::kernel::[  220.483621] ata1: EH complete
15:52:13::kernel::[  222.770949] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
15:52:13::kernel::[  222.771016] ata1.01: BMDMA stat 0x65
15:52:13::kernel::[  222.771075] ata1.01: failed command: READ DMA EXT
15:52:13::kernel::[  222.771144] ata1.01: cmd 25/00:08:f8:17:00/00:00:25:00:00/f0 tag 0 dma 4096 in
15:52:13::kernel::[  222.771147]          res 51/40:00:f8:17:00/40:00:25:00:00/10 Emask 0x9 (media error)
15:52:13::kernel::[  222.771309] ata1.01: status: { DRDY ERR }
15:52:13::kernel::[  222.771367] ata1.01: error: { UNC }
15:52:13::kernel::[  222.881632] ata1.00: configured for UDMA/133
15:52:13::kernel::[  222.913731] ata1.01: configured for UDMA/133
15:52:13::kernel::[  222.913798] ata1: EH complete
15:52:13::kernel::[  222.941704] kjournald starting.  Commit interval 5 seconds
15:52:13::kernel::[  222.941731] EXT3-fs: mounted filesystem with ordered data mode.
15:52:13::kernel::[  225.202590] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
15:52:13::kernel::[  225.202677] ata1.01: BMDMA stat 0x65
15:52:13::kernel::[  225.202737] ata1.01: failed command: READ DMA EXT
15:52:13::kernel::[  225.202806] ata1.01: cmd 25/00:08:f8:17:00/00:00:25:00:00/f0 tag 0 dma 4096 in
15:52:13::kernel::[  225.202809]          res 51/40:00:f8:17:00/40:00:25:00:00/10 Emask 0x9 (media error)
15:52:13::kernel::[  225.202969] ata1.01: status: { DRDY ERR }
15:52:13::kernel::[  225.203027] ata1.01: error: { UNC }
15:52:13::kernel::[  225.325628] ata1.00: configured for UDMA/133
15:52:13::kernel::[  225.357730] ata1.01: configured for UDMA/133
15:52:13::kernel::[  225.357801] ata1: EH complete
15:52:13::kernel::[  227.645290] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
15:52:13::kernel::[  227.645356] ata1.01: BMDMA stat 0x65
15:52:13::kernel::[  227.645414] ata1.01: failed command: READ DMA EXT
15:52:13::kernel::[  227.645483] ata1.01: cmd 25/00:08:f8:17:00/00:00:25:00:00/f0 tag 0 dma 4096 in
15:52:13::kernel::[  227.645486]          res 51/40:00:f8:17:00/40:00:25:00:00/10 Emask 0x9 (media error)
15:52:13::kernel::[  227.645648] ata1.01: status: { DRDY ERR }
15:52:13::kernel::[  227.645706] ata1.01: error: { UNC }
15:52:13::kernel::[  227.765627] ata1.00: configured for UDMA/133
15:52:13::kernel::[  227.797703] ata1.01: configured for UDMA/133
15:52:13::kernel::[  227.797773] ata1: EH complete
15:52:13::kernel::[  230.098939] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
15:52:13::kernel::[  230.099010] ata1.01: BMDMA stat 0x65
15:52:13::kernel::[  230.099069] ata1.01: failed command: READ DMA EXT
15:52:13::kernel::[  230.099138] ata1.01: cmd 25/00:08:f8:17:00/00:00:25:00:00/f0 tag 0 dma 4096 in
15:52:13::kernel::[  230.099141]          res 51/40:00:f8:17:00/40:00:25:00:00/10 Emask 0x9 (media error)
15:52:13::kernel::[  230.099303] ata1.01: status: { DRDY ERR }
15:52:13::kernel::[  230.099361] ata1.01: error: { UNC }
15:52:13::kernel::[  230.221629] ata1.00: configured for UDMA/133
15:52:13::kernel::[  230.253724] ata1.01: configured for UDMA/133
15:52:13::kernel::[  230.253795] ata1: EH complete
15:52:13::kernel::[  232.552618] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
15:52:13::kernel::[  232.552690] ata1.01: BMDMA stat 0x65
15:52:13::kernel::[  232.552750] ata1.01: failed command: READ DMA EXT
15:52:13::kernel::[  232.552819] ata1.01: cmd 25/00:08:f8:17:00/00:00:25:00:00/f0 tag 0 dma 4096 in
15:52:13::kernel::[  232.552823]          res 51/40:00:f8:17:00/40:00:25:00:00/10 Emask 0x9 (media error)
15:52:13::kernel::[  232.552984] ata1.01: status: { DRDY ERR }
15:52:13::kernel::[  232.553045] ata1.01: error: { UNC }
15:52:13::kernel::[  232.672647] ata1.00: configured for UDMA/133
15:52:13::kernel::[  232.705717] ata1.01: configured for UDMA/133
15:52:13::kernel::[  232.705787] ata1: EH complete
15:52:13::kernel::[  234.995333] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
15:52:13::kernel::[  234.995405] ata1.01: BMDMA stat 0x65
15:52:13::kernel::[  234.995465] ata1.01: failed command: READ DMA EXT
15:52:13::kernel::[  234.995534] ata1.01: cmd 25/00:08:f8:17:00/00:00:25:00:00/f0 tag 0 dma 4096 in
15:52:13::kernel::[  234.995537]          res 51/40:00:f8:17:00/40:00:25:00:00/10 Emask 0x9 (media error)
15:52:13::kernel::[  234.996798] ata1.01: status: { DRDY ERR }
15:52:13::kernel::[  234.996857] ata1.01: error: { UNC }
15:52:13::kernel::[  235.117634] ata1.00: configured for UDMA/133
15:52:13::kernel::[  235.149719] ata1.01: configured for UDMA/133
15:52:13::kernel::[  235.149793] sd 0:0:1:0: [sdb] Unhandled sense code
15:52:13::kernel::[  235.149852] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
15:52:13::kernel::[  235.149946] sd 0:0:1:0: [sdb] Sense Key : Medium Error [current] [descriptor]
15:52:13::kernel::[  235.150121] Descriptor sense data with sense descriptors (in hex):
15:52:13::kernel::[  235.150209]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
15:52:13::kernel::[  235.150734]         25 00 17 f8 
15:52:13::kernel::[  235.150925] sd 0:0:1:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
15:52:13::kernel::[  235.151067] sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 25 00 17 f8 00 00 08 00
15:52:13::kernel::[  235.151486] end_request: I/O error, dev sdb, sector 620763128
15:52:13::kernel::[  235.151551] Buffer I/O error on device sdb5, logical block 70778879
15:52:13::kernel::[  235.151637] ata1: EH complete
15:52:13::kernel::[  236.328133] udev[324]: starting version 164
15:52:13::kernel::[  236.847381] input: PC Speaker as /devices/platform/pcspkr/input/input1
15:52:13::kernel::[  236.869301] ACPI: SSDT 1f7ae190 0023C (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
15:52:13::kernel::[  236.870585] ACPI: SSDT 1f7ae460 00594 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
15:52:13::kernel::[  236.909933] Monitor-Mwait will be used to enter C-1 state
15:52:13::kernel::[  236.910903] Monitor-Mwait will be used to enter C-2 state
15:52:13::kernel::[  236.911011] Monitor-Mwait will be used to enter C-3 state
15:52:13::kernel::[  236.911033] Marking TSC unstable due to TSC halts in idle
15:52:13::kernel::[  236.911382] processor LNXCPU:00: registered as cooling_device0
15:52:13::kernel::[  236.912582] ACPI: SSDT 1f7ae0c0 000CC (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
15:52:13::kernel::[  236.913512] ACPI: SSDT 1f7ae3d0 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
15:52:13::kernel::[  236.934806] Switching to clocksource hpet
15:52:13::kernel::[  236.951454] processor LNXCPU:01: registered as cooling_device1
15:52:13::kernel::[  236.963534] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
15:52:13::kernel::[  236.963651] ACPI: Power Button [PWRB]
15:52:13::kernel::[  236.963941] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
15:52:13::kernel::[  236.964096] ACPI: Power Button [PWRF]
15:52:13::kernel::[  236.965371] usbcore: registered new interface driver usbserial
15:52:13::kernel::[  236.965496] USB Serial support registered for generic
15:52:13::kernel::[  236.965921] usbcore: registered new interface driver usbserial_generic
15:52:13::kernel::[  236.965996] usbserial: USB Serial Driver core
15:52:13::kernel::[  237.241394] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
15:52:13::kernel::[  237.241512] ACPI: Video Device [IGD] (multi-head: yes  rom: no  post: no)
15:52:13::kernel::[  237.261956] USB Serial support registered for FTDI USB Serial Device
15:52:13::kernel::[  237.262819] ftdi_sio 2-2:1.0: FTDI USB Serial Device converter detected
15:52:13::kernel::[  237.263068] usb 2-2: Detected FT232BM
15:52:13::kernel::[  237.263131] usb 2-2: Number of endpoints 2
15:52:13::kernel::[  237.263194] usb 2-2: Endpoint 1 MaxPacketSize 64
15:52:13::kernel::[  237.263256] usb 2-2: Endpoint 2 MaxPacketSize 64
15:52:13::kernel::[  237.263318] usb 2-2: Setting MaxPacketSize 64
15:52:13::kernel::[  237.264372] intel_rng: FWH not detected
15:52:13::kernel::[  237.264747] usb 2-2: FTDI USB Serial Device converter now attached to ttyUSB0
15:52:13::kernel::[  237.264864] usbcore: registered new interface driver ftdi_sio
15:52:13::kernel::[  237.264932] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
15:52:13::kernel::[  237.274123] parport_pc 00:0d: reported by Plug and Play ACPI
15:52:13::kernel::[  237.274251] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
15:52:13::kernel::[  237.591236] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
15:52:13::kernel::[  237.800484] Linux video capture interface: v2.00
15:52:13::kernel::[  238.122025] ata1.00: configured for UDMA/133
15:52:13::kernel::[  238.137758] ata1.01: configured for UDMA/133
15:52:13::kernel::[  238.137823] ata1: EH complete
15:52:13::kernel::[  238.272620] [drm] Initialized drm 1.1.0 20060810
15:52:13::kernel::[  238.287023] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0d01)
15:52:13::kernel::[  238.294155] ata1.00: configured for UDMA/133
15:52:13::kernel::[  238.309758] ata1.01: configured for UDMA/133
15:52:13::kernel::[  238.309823] ata1: EH complete
15:52:13::kernel::[  238.395897] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
15:52:13::kernel::[  238.395973] i915 0000:00:02.0: setting latency timer to 64
15:52:13::kernel::[  238.405049] [drm] set up 7M of stolen space
15:52:13::kernel::[  238.406952] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input5
15:52:13::kernel::[  238.407199] usbcore: registered new interface driver uvcvideo
15:52:13::kernel::[  238.407274] USB Video Class driver (v0.1.0)
15:52:13::kernel::[  238.750953] [drm] initialized overlay support
15:52:13::kernel::[  240.456610] [drm:edid_is_valid] *ERROR* Raw EDID:
15:52:13::kernel::[  240.456679] <3>ff 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  .???????????????
15:52:13::kernel::[  240.456686] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  240.456692] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  240.456698] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  240.456704] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  240.456709] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  240.456715] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  240.456721] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  240.456726] 
15:52:13::kernel::[  242.094550] [drm:edid_is_valid] *ERROR* Raw EDID:
15:52:13::kernel::[  242.094619] <3>ff 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  .???????????????
15:52:13::kernel::[  242.094626] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  242.094632] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  242.094637] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  242.094643] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  242.094649] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  242.094655] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  242.094661] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  242.094665] 
15:52:13::kernel::[  243.733641] [drm:edid_is_valid] *ERROR* Raw EDID:
15:52:13::kernel::[  243.733710] <3>ff 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  .???????????????
15:52:13::kernel::[  243.733717] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  243.733723] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  243.733729] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  243.733735] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  243.733741] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  243.733747] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  243.733753] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  243.733757] 
15:52:13::kernel::[  245.373529] [drm:edid_is_valid] *ERROR* Raw EDID:
15:52:13::kernel::[  245.373598] <3>ff 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  .???????????????
15:52:13::kernel::[  245.373605] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  245.373611] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  245.373617] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  245.373623] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  245.373629] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  245.373635] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  245.373641] <3>3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f 3f  ????????????????
15:52:13::kernel::[  245.373645] 
15:52:13::kernel::[  245.373698] i915 0000:00:02.0: VGA-1: EDID invalid.
15:52:13::kernel::[  246.065548] Console: switching to colour frame buffer device 100x37
15:52:13::kernel::[  246.072122] fb0: inteldrmfb frame buffer device
15:52:13::kernel::[  246.072126] registered panic notifier
15:52:13::kernel::[  246.072326] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
15:52:13::kernel::[  246.072563] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
15:52:13::kernel::[  246.072799] HDA Intel 0000:00:1b.0: setting latency timer to 64
15:52:13::kernel::[  246.861037] hda_codec: ALC888: BIOS auto-probing.
15:52:13::kernel::[  246.862623] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
15:52:13::kernel::[  247.216847] ata1.00: configured for UDMA/133
15:52:13::kernel::[  247.288131] ata1.01: configured for UDMA/133
15:52:13::kernel::[  247.288242] ata1: EH complete
15:52:13::kernel::[  247.326018] ata1.00: configured for UDMA/133
15:52:13::kernel::[  247.341769] ata1.01: configured for UDMA/133
15:52:13::kernel::[  247.343158] ata1: EH complete
15:52:13::kernel::[  247.646542] Adding 2095096k swap on /dev/sda6.  Priority:-1 extents:1 across:2095096k 
15:52:13::kernel::[  247.801381] EXT3 FS on sda1, internal journal
15:52:13::kernel::[  248.014353] loop: module loaded
15:52:13::kernel::[  249.435364] kjournald starting.  Commit interval 5 seconds
15:52:13::kernel::[  249.438402] EXT3 FS on sda5, internal journal
15:52:13::kernel::[  249.441482] EXT3-fs: mounted filesystem with ordered data mode.
15:52:13::kernel::[  249.516710] kjournald starting.  Commit interval 5 seconds
15:52:13::kernel::[  249.519947] EXT3 FS on sda2, internal journal
15:52:13::kernel::[  249.523090] EXT3-fs: mounted filesystem with ordered data mode.
15:52:13::kernel::[  249.969583] r8169: eth0: link up
15:52:13::kernel::[  249.972585] r8169: eth0: link up
15:52:13::kernel::[  250.830980] fuse init (API version 7.13)
15:52:22::kernel::[  260.936015] eth0: no IPv6 routers present
15:52:22::kernel::[  261.320413] HDA Intel 0000:00:1b.0: PCI INT A disabled
15:52:22::kernel::[  261.338235] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
15:52:22::kernel::[  261.338298] HDA Intel 0000:00:1b.0: setting latency timer to 64
15:52:22::kernel::[  261.408174] hda_codec: ALC888: BIOS auto-probing.
15:52:22::kernel::[  261.409625] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
15:52:23::kernel::[  261.862230] udev[1471]: starting version 164
15:52:23::kernel::[  262.158543] intel_rng: FWH not detected
15:52:24::kernel::[  263.314541] ata1.00: configured for UDMA/133
15:52:24::kernel::[  263.329765] ata1.01: configured for UDMA/133
15:52:24::kernel::[  263.329777] ata1: EH complete
15:52:24::kernel::[  263.353665] ata1.00: configured for UDMA/133
15:52:24::kernel::[  263.369782] ata1.01: configured for UDMA/133
15:52:24::kernel::[  263.369794] ata1: EH complete
15:53:23::kernel::[  321.725059] usb 3-1: new low speed USB device using uhci_hcd and address 3
15:53:23::kernel::[  321.965094] usb 3-1: New USB device found, idVendor=04b3, idProduct=3025
15:53:23::kernel::[  321.965103] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
15:53:23::kernel::[  321.965111] usb 3-1: Product: USB NetVista Full Width Keyboard.
15:53:23::kernel::[  321.965116] usb 3-1: Manufacturer: LITE-ON Technology
15:53:23::kernel::[  321.965421] usb 3-1: configuration #1 chosen from 1 choice
15:53:23::kernel::[  321.999751] input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input8
15:53:23::kernel::[  322.000373] generic-usb 0003:04B3:3025.0002: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:1d.1-1/input0
16:05:12::kernel::imklog 4.6.4, log source = /proc/kmsg started.
share
    
Why are you removing hard disk and/or the power to your disks on your system? –  ewwhite Nov 20 '13 at 11:36
    
@ewwhite :: I just do that for testing but actual scenario is that SDB are getting DRDY errors which i was not able to simulate.But with logs i see that when SDB gets a DRDY error it makes my SDA inaccessible and makes it read only file system –  Ragav Nov 20 '13 at 11:41
1  
I see more errors on sdb, and a lot of irrelevant junk, but still nothing about sda going read-only. –  MadHatter Nov 20 '13 at 13:23
2  
I ask again: what has either of those to do with proving that sda goes read-only? At the moment, it looks like sdb fails, and that freezes the system. Get any data that's on it off, and replace it. –  MadHatter Nov 20 '13 at 15:06
1  
I have not yet seen any evidence that the primary is having any problems at all. The two things you note above (syslog, command not found) aren't evidence without knowing which file systems are on which drive. Grant has a pretty good point below, anyway: once a device goes crazy on a bus, it can often hang the bus. We know from your kernel logs that the kernel is continually reinitializing the controller to try to shock sdb back to life, and while it's doing that, sda will be inaccessible as well. –  MadHatter Nov 20 '13 at 16:02
show 12 more comments

migration rejected from serverfault.com Nov 21 '13 at 3:53

This question came from our site for professional system and network administrators. Votes, comments, and answers are locked due to the question being closed here, but it may be eligible for editing and reopening on the site where it originated.

closed as unclear what you're asking by Gilles, slm, jasonwryan, Anthon, Patrick Nov 21 '13 at 3:53

Please clarify your specific problem or add additional details to highlight exactly what you need. As it's currently written, it’s hard to tell exactly what you're asking. See the How to Ask page for help clarifying this question.If this question can be reworded to fit the rules in the help center, please edit the question.

Browse other questions tagged or ask your own question.