2

I have 2 snmp packages to install on a standalone server. 1 package is already using ports 161/162. Where can I configure a Cacti Listener and which ports can I use? Also which snmpd.conf file should I edit?

Improve this question

1 Answer 1

Reset to default
2

It looks like there is a SNMP Port option when creating a device on Cacti. As to which port you choose, well I get that depends on the Management Interface Bases the two snmpd servers use and what you'd like to report on. You could take a look at what data is exposed with an snmpwalk. Assuming the server uses v1, then

snmpwalk -mALL -v1 -cpublic snmp_agent_Ip_address:port system

where snmp_agent_Ip_address:port are your system's IP and the 161 or 162 port. Or remove the system OID, and snmpwalk will default to SNMPv2-SMI::mib-2 instead. You will probably have to change -cpublic to whatever your public read-only community string is, such as -cmycommunity.

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .