0

Here is my /etc/network/interfaces file.

auto eth0
iface eth0 inet static
address 192.168.1.101
netmask 255.255.255.0
gateway 192.168.1.1

auto wlan0
iface wlan0 inet manual
wpa-driver nl80211
wpa-roam /etc/wpa_supplicant.conf
iface default inet static
address 192.168.1.101
netmask 255.255.255.0
gateway 192.168.1.1
dns-nameservers 192.168.1.1

When wifi was closed on my home wireless router,eth0 was activated.
But why the ip is not 192.168.1.101?
Another ip was displayed by ifconfig command.

Improve this question

1 Answer 1

Reset to default
1

You cannot give the same network, much less the same IP address to two different network/interfaces.

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .